When you decide that you are going to build a backyard fire pit, you will want to make sure that you do it properly. If you do not do it properly, the fire could easily get out of your pit and spread around the yard. Since this is the case, you may want to have some DIY building a firepit advice to help ensure that you can build your firepit and keep the fire contained. With that being the case, here is some advice that will make the building of your fire pit go quickly and safely.
This is going to be one of the first things that you need to do and is often one of those things that gets overlooked quite a bit. If the land is not level, then the bricks that you are using to build your fire pit up with will not be level. This also means that when you are burning a fire in the pit their is a chance that the wood can roll around.
Then you will have the problem of the wood putting to much pressure on the outer wall of the pit and this can cause it to collapse. To avoid this issue, you need to find land that is level or if you cannot do that, dig down a little bit to level the land off to ensure the pit is built up properly.
Material Choice Matters
Just like any DIY project you will need to be careful with the materials that you select to use for the building process. This may seem as a shocker for a lot of reasons, but with a fire pit you need to get brick to do the inner lining, unless you do a fire ring that is rated for direct flame exposure.
If you do not do this, their is a chance that you could end up getting a brick that when you light your first fire inside of it will fail. Then you will have problems with the fire coming out of the side of your bricks where it is not supposed to be coming out. Not only that the fire bricks that are meant for the fire pits tend to have a higher temperature rating, which means they will deflect more of the heat back into the fire or the chimney direction to keep it from burning people who are by the fire.
Seal The Fire Pit
Losing the heat that you have generated in the fire pit can be a bad thing if it is coming out the sides. Since this is the case, you may want to consider the different ways that you can seal the sides of the fire pit. This way you do not have to worry about the flames coming out of the sides of the pit, but nor do you have to worry about the fire pit having the heat come out as radiant heat directly from the flame. So you will be able to protect yourself and the visitors that you have coming over from getting hurt by the fire pit that you have worked so hard to get put into your back yard.
Way To Stoke The Fire
This is a challenge that you tend to overlook until you have your first fire in the pit and the flames are roaring. That is how are you going to put the wood into the hot fire that you cannot get close to. In most of the fire pits they are just a big giant open hole, but some of them are going to be more elaborate and require you to put the wood in at a specific area to keep the fire going and not block any air flow. Since this is the case, you need to make sure you consider how you will be able to put the wood in and make sure you do not get burned.
Cooking Utensil Selection
When you are completing a DIY building a firepit project you may be tempted to start to cook on the fire right away. While this is a great idea, you need to make sure you select the proper utensils to cook on the fire with. This can include something as simple as a fork that has a really long handle to roast marshmallows on or something as complicated as a stew pot that has to be held over the fire on a wooden tripod. All of these are going to make a difference in how well you can cook, but it will help you know if the fire pit was built properly and can be used in the manner you want it to be used.
When you decide to do a project around the house, you need to realize it can be a lot harder to do than what you think. This is when you should use some advice when you are doing these projects to avoid making any mistakes. This is very true when you do a DIY building a firepit project. When you do this, it is going to make it easier for you to get the project completed and know that it is done at a level that is going to keep the fire pit going for years to come, but also avoid any type of injury people may experience from the fire pit and flames.